Water Flood Leakage Detection System Alarm Sensor with Long Cable and 3/4" Motorized Auto Shutoff Valve BSP | Безопасность и

Leakage Alarm Sensor System with Automatic Shut off DN20 Valve BSP for Ukrain Russia Kazakstan Moldova

Introduction:

This water leak detection alarm system is very economic, reliable and efficient. Very easy to install and use. The water detector can connect 1pc or 2pcs valve at most. DN15, DN20, DN25 valve optional. When the 6 meter long sensitive water sensor detects water leakage happen, the water detector  will immediately sound warning tone and corresponding LED light up, then the valve will automatically shut off water. This can avoid water leakage damage in your house, also can save water resource.

Product Detail:

Feature:

• Water leak can cause large economic loss, to avoid expansion of damage caused by water leakage.

• It will alarm as well as send out a sign to electric valve once the sensor detected water leaking

• Electric valve automatically close the water power after received the sign

• Provides reset switch to stop alarm

• 2-meter wire with sensor for long distance detecting

• Usually suitable for underground reservoir of high building SPA and so on. You can also place it near toilets, basements, washing machines, air-condition machines, refrigerators, dishwashers, sinks, aquariums, sump pumps, water heaters, and anywhere with potential water damage

• Protects you home by keeping the leak alert anywhere water leak is a potential danger

Specification:

• Working Voltage: 12V Max.

• working current: 80mA

• Standby current: 5mA

• Alarm startup time: 1 second

• Alarm time: continue

• Output electric potential: 100dBu

• Valve close startup time:1 second

• Valve open startup time: 1 second

How it works:

• Put the water sensor on the place where water leakage may happen

• Turn off the valve, and connect it to water pipe, to be sure the valve interface can not have leaks, then the valve connected to the central unit 

• Connect central unit to the AC power(Power LED indicator will light up. Sound one beep and Sensor LED will light from Sensor 1 to Sensor 8) press the OPEN button to open the valve.

• Once leakage happens, when the water touch the water sensor, the central unit will immediately sound warning tone and corresponding LED light up (until there is no detection of leakage,If more than one Sensor detected water leakage, all corresponding LED will also light up ), then the valve will automatically shut off

• User can repair the place where water leak happens according to the audible alarm, and press the RESET button to turn off the alarm

• After maintenance and all the leakage were repaired, press the OPEN button to open the valve (you can also press the CLOSE button to test if the valve is working properly). press Reset button and resume to Standby state

• Keep the water sensor flat where water leakage may happen after sopping up the water, the device can be recycled 
 

Note: 1. Even if without electric ball valve, the water detector will still operate, detect water leakage and sound warning tone but the sound level is a little smaller than with AC power; 2. Water detector unit is not waterproof. Therefore pls do not place it where water may floor; 3.Do not place sensor terminals on the metallic objects that may cause false warning sound.

Package Content:

1pc  Water Sensor Unit              

1pc  3/4" Electric Ball Valve (Normally BSP type, NPT valve also can provide)

1pc  6m Water Leak Sensor Wire

1pc  Power Adatper (EU/US/UK/AU plug optional)

See what buyers say: