*Текущая стоимость уже могла изменится. Что бы узнать актуальную цену и проверить наличие товара, нажмите "Добавить в корзину"






Features:10pcs of dent & ding puller tab, replacement suckers in different shapes for multiple purposes.Dent Remover Repair tool repairs the dents on your car.Slide hammer is more powerful for paintless dent repair, conquer big dent.Use widely for the sheet metal processing of automobile, refrigerator, motorcycle, washing machine, etc.
How to use this paintless dent repair kits?
1.Clean the dent with a clean wet cloth;2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;8. Clean the repaired place with a clean wet cloth.
Specifications:
Color as shown
Material: metal + plastic
Bag Size:25x17x10cm
Weight:1000g
Package included:
1x Gold Puller
1x 12V 20W Glue Gun
10x Blue Tabs
5x Black Glue Sticks
5x Yellow Glue Sticks
1x Red T puller
2x Shovels
1x Towel
1x Alcohol Bottle(Alcohol not included)
1x English Manual
1x Tools Bag
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.