GT2871 GT2860 T25 T28 Flange Universal Turbo Charger 0.6 A/R 0.64 Turbine universal application 7-12PSi journal bearing | Автомобили и

GT2871 GT2860 T25 T28 Flange Universal Turbo Charger 0.6 A/R 0.64 Turbine universal application 7-12PSi journal bearing | Автомобили и

Exhaust Inlet (Turbo Manifold) Flange: Standard T25 Flange

Exhaust Outlet (Downpipe) Flange: 5-Bolt

Turbine Trim: 76

Turbine A/R: 0.64

Turbine Inducer Diameter: 53.8mm

Turbine Exducer Diameter: 47mm

Compressor Trim: 48

Compressor A/R: 0.60

Compressor Inducer Diameter: 49.2mm

Compressor Exducer Diameter: 71 mm

Internal Wastegate: Yes

Warranty: 2 Years for any manufacture defects

Oil Restrictor size：inside diameter 2mm

Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). 

Perfect for all 1.5L-2.0L engine，for all 4 cylinder 

Horse Power: Boost Horse Power up to 350BHP

Product Material:：

1. Turbine housing ：Ductile iron QT450-10 shell with high-temperature resistance up to 700 degrees Celsius

2. Steel Turbine Wheel：Made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius

3. compressor wheel/blades：Cast aluminium with good gas tightness and corrosion resistance

4. Capable of Boosting Horse Power up to 350 BHP.

===============================

product Feature: 

1. Cost effective Price: 

Give your car 20%-40% more total power with friendly price

1. Excellent Design:

Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance

2. High Temperature Resistance:

special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900°

ductile iron QT450-10 Turbine housing Can withstand temperatures up to 700℃

3. High Efficiency:

High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag

4. Durable:

Water-cooled/oil-cooled structure extends turbine service life

5. 100% BALANCING TEST:

This Turbocharger you will receive has been balanced using the VSR machine technology. 

=====================================

Product  Performance：

1. Rich Experience In Turbo Production And Own Factory

2. Quality Assurance

3. High Performance Rotor

4. High-Speed Oil Seal Ring

5. Strict Quality Inspection

6. Precision Clearance

7. High-speed Accessories

8. Increase Engine Power

9. Improve Emissions & Save Oil

* Please check the specifications carefully before buying. If you are not sure about these information, please feel free to contact us.

* This is universal application turbo, so modification might be required for some vehicles

* Professional installation is highly recommended(No Instruction Included)

About Turbo failure:

The 6 most common failures are:

1. Oil starvation

2. Oil contamination

3. Impact damage

4. Blocked Engine breather

5. Over speeding of shaft and wheel

6. Hot shut down

Common causes of turbocharger failure:

1. Improper Lubrication / Lack of maintenance

2. Foreign object damageOverspeeding

3. Excessive oil pressure

4. High mileage engine

5. Engine Lacks Power 

The following situation indicate the turbo failure:

1. Black Exhaust Smoke     

2. Excessive Engine Oil Consumption     

3. Blue Exhaust Smoke     

4. Turbo Noisy     

5. Cyclic sound from turbo     

6. Oil Leak from compressor seal     

7. Oil Leak from turbine seal

highly suggest you find professional mechanic to help you install it, here are somecheck list before installation.                                                                  

1. Replace oil supply lines and fittings.  These lines often become plugged with decomposed oil which restricts oil flow and drainage.

2. Do not used silicone or thread tape

3. Make sure all openings to turbo are open and not plug or capped off.

4. Shut off fuel or disable ignition and crank the engine for at least 15 seconds or until oil pressure is raised

5. Allow engine to fast idle (1,000 RPM) for 3 - 5 minutes to for Seat turbo seals

6. Always let engine idle for 3 -5 minutes before shut down, otherwise the turbo will continue to spin  without oil lubrication and pressure

7.When changing oil, be sure to prime oil filter