The Front Headlights head light lamps Of Glass Lamp Shell Transparent Lid Masks for A6 C5 2003-2005 | Автомобили и мотоциклы

The Front Headlights head light lamps Of Glass Lamp Shell Transparent Lid Masks for A6 C5 2003-2005 | Автомобили и мотоциклы

1.If you have an oven that is best,just remove the back cover of the luminaire and the bulb.Put in the oven and warm to 80°C.Heat for 10 minutes and the glue softens.The lampshade is separated from the lamp housing.
2:If you don't have an oven,you have to use a heat gun,which heats the sharpest corner of the headlight,heats it for a while,and inserts a screwdriver after the glue has softened.(Note:Do not use too much force to avoid damage;when heating to the glove and Press it,there is still some heat,stop heating.Be sure that the temperature is not too high to prevent damage to the headlights)
3:After the heat is over,quickly open the corner and remember to wear gloves(the gloves should be clean and can't be dropped)
4:Everything went well and was more proficient,from heating to splitting,a minute was enough.If it doesn't go well.Continue toheat the separated part with a heat gun.The glue softens.Quickly separate.
5:After the separation,do your best.Clean the glue inside the glue tank.Put on gloves and start installing a new lampshade
6:Use glue to apply glue to the tank.Glue should be in moderation.About 2/3
7:Install the new lamp cover.A small amount of glue overflows during installation.Can not be processed first.After the glue is dried.Handle with a blade.The surface of the lampshade is glued and rubbed with a cloth.
At the end of the assembly,we need to air dry for 3-5 days.Reload the car.And can't wash or rain in a week.
Item Type:Lamp Hoods
Special Features:replace
Product Name:Car headlight lampshade
Production process:high temperature injection molding PC hardening
Applicable models:A6 C5 2003-2005
Color:transparent
material:plastic
Package Contents:
1* left cover
1* right cover
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.