Street GT35 GT3582 Universal Turbo Anti-Surge T3 Flange 4 Bolts Turbocharger Compressor Turbine Housing Perfect for 2.5L-6.0L | Автомобили

Street GT35 GT3582 Universal Turbo Anti-Surge T3 Flange 4 Bolts Turbocharger Compressor Turbine Housing Perfect for 2.5L-6.0L | Автомобили

Anti Surge GT3582 Turbo GT35 T3 Flange Water Cooled Turbocharger Turbolader

Notice：The color of the pressure shell impeller is gold and silver white randomly sent.

This turbo is an universal application street turbo, some modification may be required based on individual vehicle. The dimension picture is available, please contact us if needed. Please check the details carefully before purchasing.
 
Application
Perfect for all 4/6 cylinder and 3.0L-6.0L engines
Horse Power: Capable of Boosting Horse Power up to 600HP
 
 
Specification:

Exhaust Inlet (Turbo Manifold) Flange: T3 Flange

Exhaust Outlet (Downpipe) Flange: 4-Bolt

Turbine Trim: 84.2

Turbine A/R: 0.63

Turbine Inducer Diameter: 68mm

Turbine Exducer Diameter: 62.4mm

Compressor Trim: 56.9

Compressor A/R: 0.7

Compressor Inducer Diameter: 61.5mm

Compressor Exducer Diameter: 81.5mm

Bearing Type: Wet Float

Cooling Type: Water + Oil

Internal Wastegate: No

Warranty: 2 Years for any manufacture defects

Compress Inlet Size(Air intake): 4 inch (103.5mm)

Compressor Outlet Size: 2.5 inch (63.6mm)

Wastegate：External Wastegate

Oil feed/inlet: M10*7/16-24

Oil drian/outlet: 2*M8*1.25

water inlet/outlet: M14* 1.5

Maximum PSI：22

 
Type: Street type

Product Material:：

1. Turbine housing ：Silicon-Molybdenum turbine housing with high-temperature resistance 850℃

2. Steel Turbine Wheel：Made from the the special K419 alloy to achieve stability under high temperatures up to 1000℃

3. Compressor housing：ZL104 aluminum

4. compressor wheel/blades：Aluminum blades with precision machining forging. The light weight design enables reduced noise and increased response without compromising comfort or longevity

5. Max HP： UP to 600hp

Product Feature: 

1. Excellent Design:

Excellent Design And Processing and durable floating bearing structure + high-precision blade dynamic balance

2. High Temperature Resistance:

special K418 alloy Turbine Wheel can withstand exhaust temperature Above 900°

3. High Efficiency:

High efficiency and low inertia intake and exhaust blades can greatly reduce turbo lag

4. Durable:

Water-cooled/oil-cooled structure extends turbine service life

5. 100% BALANCING TEST：This Turbocharger you will receive has been balanced using the VSR machine technology. 

Product  Performance：

1. Rich Experience In Turbo Production And Own Factory

2. Quality Assurance

3. High Performance Rotor

4. High-Speed Oil Seal Ring

5. Strict Quality Inspection

6. Precision Clearance

7. High-speed Accessories

8. Increase Engine Power

9. Improve Emissions & Save Oil

Notice：

We highly recommend you make sure the points below before installing:

1.Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. 

2.Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. 

3.After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. 

Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil.

NOTE:

* Professional installation is highly recommended (No Instruction Included)

*This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore Please review the specifications and verify compatibility prior to placing your order. 

* For any needs please contact us